ATAC™
Active Tuning Amplitude Controller

 

ATAC™ - (110 or 220 Volts)

The ATAC™ is a cost effective, self-tuning controller for electromagnetically driven vibratory feeder systems. It is specifically designed to eliminate manual tuning with optimizing feeder performance and minimizing operational costs. The true closed loop controller maintains the desired vibration intensity while exciting the feeder at its natural frequency. The all-digital design results in a “plug and play” setup procedure and an intuitive interface. The ATAC™ easily interfaces to a photocell or PLC.

Part Number:	Contents:
AT-1000-OFK (110 Volts)	(15 A Output), Open Frame Mtg. Assembly Motion Sensor, 1K-Ohm Amplitude Potentiometer w/Knob, LED Kit, Manual
AT-1050-OFK (110 Volts)	(15 A Output), Open Frame Mtg. Assembly Motion Sensor, 1K-Ohm Amplitude Potentiometer w/Knob, LED Kit, LCD Display, Manual
AT-1051-HC (110 Volts)	(15 A Output), Nema-1 Enclosure, LCD Display, Input Cable, Motion Sensor, Strain Relief, Manual
AT-1051-HC-CE (110 Volts)	(15 A Output), Nema-1 Enclosure, LCD Display, Input Cable, Motion Sensor, Strain Relief, Manual, (Unit CE Compliant)
AT-2000-OFK (220 Volts)	(7 A Output), Open Frame Mtg. Assembly Motion Sensor, 1K-Ohm Amplitude Potentiometer w/Knob, LED Kit, Manual
AT-2050-OFK (220 Volts)	(7 A Output), Open Frame Mtg. Assembly Motion Sensor, 1K-Ohm Amplitude Potentiometer w/Knob, LED Kit, LCD Display, Manual
AT-2051-HC (220 Volts)	(7 A Output), Nema-1 Enclosure, LCD Display, Input Cable, Motion Sensor, Strain Relief, Manual
AT-2051-HC-CE (220 Volts)	(7 A Output), Nema-1 Enclosure, LCD Display, Input Cable, Motion Sensor, Strain Relief, Manual, (Unit CE Compliant)
HPAT-2051-HC (220 Volts High Power)	(12 A Output), Nema-1 Enclosure, LCD Display, Input Cable, Motion Sensor, Strain Relief, Manual

Additional Models Available

 

ATAC™ Spare Parts Listing:

Part Number:	Nomenclature:
61-1016-AB	Mini Motion Sensor–Push-in DIN Connector
61-1016-1L	Mini Motion Sensor–Locking DIN Connector
61-1003-EC	Extender Cable
29-100-Display	LCD Display
49-101-220-PC	Power Cord (220v)
49-100-110-PC	Power Cord (110v)
45-102-P-1K	1K Ohm Pot
37-101-LED	LED Kit
17-100	Microchip (programmed)
69-103	Operate/Hold Switch
69-104	Power Switch
49-204	Input Power Receptacle
21-110	Fuse Support Plate (110v)
21-211	Fuse Support Plate (220v)
05-622	Screw Lock DIN Connector

Home | About | Products | Prod. Overview | Literature | Part # Listing | Downloads | Contact
© 2004 TSENGINEERING.COM
ALL RIGHTS RESERVED
Keen Manufacturing | Specialty Switch